InSpire Chlorine Granules 5kg

Stabilised Chlorine Granules are your go-to solution for maintaining clean and safe spa water. Regular chlorination is essential for ensuring your spa remains sanitary and enjoyable. Always test your spa water before use to maintain optimal chlorine levels.

Ideal Chlorine Level: 3 to 5 parts per million (ppm).

When to Check: Test the chlorine levels daily and before each use to ensure they are within the ideal range.

How to Use:

Pre-Dissolve: Measure the required amount of granules and dissolve them in a clean plastic bucket filled with warm water. Stir until the granules are fully dissolved.

Add to Spa: With the spa’s circulation pump running, slowly pour the dissolved solution onto the surface of the spa water.

Circulate: Allow the circulation pump to run for 15 minutes to ensure the solution is evenly distributed.

Re-Test: Check the chlorine level again. Repeat the process if necessary until the level reaches 3-5 ppm. Wait 15 minutes before using your spa.

Dosage Guide: To raise the chlorine level in a 1500L spa from 0 ppm to 4 ppm, add approximately 12g of Chlorine Granules. A heaped teaspoon holds about 8g.

Important Safety Precautions:

Do Not Mix Chemicals: Avoid mixing chlorine granules with other chemicals to prevent dangerous reactions.

Pre-Dissolving: Always add granules to water, not the other way around. Ensure the bucket is clean; rinse before use if unsure.

Handling: Use chemicals in a well-ventilated area, preferably outdoors. Wash hands thoroughly after use.

Storage: Store chemicals in a secure, cool, and dry place.

Keep your spa sparkling clean and safe with our effective Chlorine Granules and enjoy every soak to the fullest!